Table of Contents

Process Feedback RTC specific

Getting Stages ready to create Feedback as new Work Items in a RTC Project Area is simple and works as follows:

Create a new Project Area (PA) or use an existing one. For the configuration you will need the name of that PA. In this example we use “Scrum Demo”. Next, we need a user, who can log into the RTC server and is allowed to create work items in the PA named Scrum Demo. For this example, we select the user, whose id is admin and password is admin as well. Next step is to consider, which authentication is used. In our example, we are using the form based authentication.

The last step is, to think about the data you want to attach to a work item, which will be created, when a Stages-User submits feedback.

This data can be specified in the sections <attributes> and <system-attribute-mappings> of the stages configuration file (config.xml).

Stages config.xml

To enable the RTC Feedback-System, the following configuration section must be added in the conf/config.xml:

<?xml version="1.0" encoding="UTF-8" ?>
<stages-config>
  <!-- Insert this block to your stages config.xml file -->
  <feedback-systems>
    <feedback-system name="rtc">
        <host url="https://rtc.example.com/ccm" ident="rtc1" displayName="Example RTC">
 
        <!-- Name of the project area, which will contain all the work items created by stages -->
        <property name="projectAreaName" value="Scrum Demo" />
 
        <!-- Type of the work item, which will be created by stages -->
        <property name="workItemType" value="task" />
 
        <!--
            Please only enable, if you know what you are doing here
            Can be enabled, if your RTC server uses untrusted (or self-signed) ssl certificates
        -->
        <property name="trustSsl" value="true" />
 
        <!-- The Username to access the RTC server and create work items -->
        <property name="username" value="admin" />
 
        <!-- The corresponding password -->
        <property name="password" value="admin" />
 
        <!--
            Authentication Method, to log into the RTC server
            Possible values are: "basic", "form" and "jas"
        -->
        <property name="authenticationMethod" value="form" />
 
        <!--
            See common feedback documentation
            - The "type" defines, if the field is a multi-line text ("text") or a single line string ("string").
            - The "target" defines the id of the custom attribute in RTC (e.g. "some.custom.attribute").
            - Optional: The targetType defines the type of the RTC attribute. For supported RTC target types see below.
        -->
        <attributes>
            <attribute ident="text" type="text" target="test.text" />
            <attribute ident="boolean" type="text" target="test.boolean" />
            <attribute ident="description" type="text" target="description" />
        </attributes>
 
        <!--
            See common feedback documentation
            The "target" defines the id for the custom attribute in RTC (e.g. "some.custom.attribute").
            Optional: The targetType defines the type of the RTC attribute. For supported RTC target types see below.
        -->
        <system-attribute-mappings>
            <attribute source="creatorFullname" target="test.user" targetType="contributor" />
            <attribute source="elementUrl" target="test.link" />
        </system-attribute-mappings>
 
        <!--
            See common feedback documentation
            The "target" defines the id for the custom attribute in RTC (e.g. "some.custom.attribute").
            Optional: The targetType defines the type of the RTC attribute. For supported RTC target types see below.
        -->
        <custom-attribute-mappings>
             <attribute value="Stages" target="MySourceSystemField" targetType="some.custom.attribute" />
             <!-- Category path from https://localhost:9443/ccm/oslc/categories -->
             <attribute value="CategoryA/SubCategoryB" target="filedAgainst" targetType="filedAgainst"/>
             <!-- PlannedFor name from https://localhost:9443/ccm/oslc/iterations -->
             <attribute value="Iteration A" target="plannedFor" targetType="plannedFor"/>
        </custom-attribute-mappings>
 
        </host>
    </feedback-system>
  </feedback-systems>
</stages-config>

Technical detail

The RTC Feedback Integration uses the discovery mechanisms of OSLC. It is build using the OSLC library Eclipse Lyo.

To figure out the correct names for workItems and other Attributes follow the instructions on Jazz.net